General Data | | |
| Energy efficiency class, central heating | | A |
| Energy efficiency class, DHW heating | | A |
| Min./max. rated heating output at 80/60 °C | kW | 6.3 / 17.7 |
| Min./max. rated heating output at 50/30 °C | kW | 6.6 / 18.6 |
| Min./max. rated input | kW | 6.4 / 18.1 |
| Min./max. oil throughput | kg/h | 0.53 / 1.52 |
| Nominal capacity / equivalent nominal capacity of the TS cylinder | l | 160 / 200 |
| TS continuous cylinder output | l/h | 440 |
| TS performance factor | NL60 | 4 |
| DHW output | l/10 min | 270 |
| TS standby heat loss | kWh/24 h | 1,09 |
| Height | A mm | 1290 |
| Width | B mm | 1132 |
| Depth | C mm | 605 |
| Heating return | D mm | 426 |
| Heating return | E mm | 194 |
| Heating flow | F mm | 919 |
| Heating flow | G mm | 516 |
| Air/flue pipe connection | H mm | 462 |
| Air/flue pipe connection | I mm | 203 |
| Air/flue pipe diameter | mm | 80/125 |
| Air/flue gas routing | | B23p, B33p, C33(x), C43(x), C53(x), C63(x), C83(x), C93(x) |
| Heating flow/return outside Ø | G | 1½" |
| Condensate connection | | 1" |
| Fuel oil to DIN 51603-1/6 | | Standard fuel oil EL, low sulphur fuel oil EL or biofuel oil B10 |
| Nozzle * | | Steinen 0.25 / 60° full cone |
| Fuel oil filter | | Opticlean 5 - 20 μm |
| Min./max. pump pressure | bar | 3.5 / 23 |
| Maximum negative pressure in oil line | bar | 0,3 |
| Flow temperature, factory setting | °C | 80 |
| Max. flow temperature | °C | 85 |
| Heating water pressure drop (at Δt = 20 K / 10 K) | mbar | 44013 |
| Max. permissible boiler pressure | mbar | 3 |
| Water capacity of the heat exchanger | l | 7,5 |
| Standard seasonal efficiency [to DIN] at 40/30 °C (net cv/gross cv) | % | 105 / 99 |
| Standard seasonal efficiency [to DIN] at 75/60 °C (net cv/gross cv) | % | 102 / 97 |
| Efficiency at rated load at 80/60 °C (net cv / gross cv) | % | 98 /92 |
| Efficiency at 30 % partial load and TR = 30 °C (net cv/gross cv) | % | 105 / 99 |
| Boiler standby loss qB at 70 °C (EnEV) | % | 0,75 |
| Rated heat input max. flue gas mass flow rate | g/s | 7,02 |
| Flue gas temperature 50/30 - 80/60 °C | °C | 44 - 61 |
| Available fan draught | Pa | 70 |
| Lowest heat input min. flue gas mass flow rate | g/s | 2,44 |
| Flue gas temperature 50/30 - 80/60 °C | °C | 32 - 50 |
| Available fan draught | Pa | 20 |
| Max. amount of condensate at 40/30 °C | l/h | 1,4 |
| Condensate pH value | | approx. 3 |
| Boiler weight | kg | 92 |
| IP rating | IP | IP 20 |
| Integral fuse (medium time lag) | A | 4 |
| Min./max. power consumption | W | 23 / 101 |
| Power consumption on standby | W | 5 |
| Electrical connection | | 230 V / 50 Hz / 10 A |
